|
|
BOW
ELECTRONIC SOLDER
TECHNICAL BULLETIN
BOW #1025 MIL
MIL-F-14256 Type RA Fluxes
|
Bow #1025-MIL activated
rosin fluxes have been formulated to meet Military Specification
MIL-F-14256 requirements for Type RA (Rosin Activated
Liquid Flux). These fluxes are homogeneous mixtures
of purified grade water-white gum rosin, alcohol solvent,
effective activating agent, and a unique wetting agent.
These fluxes meet the J-STD-004 Joint Industry Standard
Requirements for Soldering Fluxes and are classified
as type "ROH1". |
| Bow #1025-MIL is recommended
for foaming application, however, it can be used for
dipping and spraying. BOW #1000 Thinner is recommended
to replace any solvent loss due to evaporation. |
| The rosin residues can
be removed with a saponifier and water. |
| Color
and Appearance |
Amber Liquid |
| Solids Content (% by wt.) |
25 |
| Specific Gravity @ 20°C |
0.880 |
| Color & Transparency |
#13 Gardner |
| Flow Extract Resistivity |
50,000 ohm-cm |
| Spread Factor |
87 |
| Dryness |
Pass |
| Specific Gravity @ 25°C |
0.844 |
| Flash Point (TCC) |
65°F |
| Bow #1025-MIL fluxes are available
in 1-gallon, 5-gallon and 55-gallon containers. They
can be stored indefinitely, without changing fluxing
characteristics, under normal conditions. Do not store
near fire or sparking environments. |
|
| |
| |
|
|
Lead Free
Electronic
